Anyone who spends time in cities won’t have missed the rise in popularity of micromobility (aka urban mobility). Small, lightweight vehicles such as e-scooters and e-bikes provide affordable, accessible, and eco-friendly transportation that is also cost-effective, and are seen as the answer to gridlocked cities and urban air pollution. Ernst & Young has called e-scooters the ‘fastest growing mode of transport ever documented’.  In fact, the micromobility market is expected to enjoy CAGR of 16 percent from $3 billion in 2019 to $12 billion by 2027. This growth is due to both changes in consumer sentiment, where micromobility solutions are increasingly seen as viable commuter options, and the industry itself willingly tackling some of its more pressing issues, such as parking. Micromobility is also getting a boost from city planners, who are prioritizing greater sustainability and efficiency and the reduction of car use within city boundaries.

So, where does IoT fit into the micromobility picture? From a tech perspective, cellular connectivity is one of the keys to the success of micromobility because it is critical to managing the growing fleets. Additionally, IoT allows micromobility to address major criticisms, such as e-scooters being dumped on sidewalks willy-nilly. Connecting things like e-scooters helps the industry ensure they know where their assets are and that they are in working order.

There are roughly six different IoT sensors that can enable and enhance a micromobility solution:

  • A condition sensor diagnoses battery levels and maintenance needs
  • A sound sensor cautions too-close pedestrians
  • An NFC (near-field communication) sensor is used for payments and unlocking
  • A motion sensor detects vandalism or impact
  • A GNSS (Global Navigation Satellite System) sensor maps the location of the fleet
  • Air quality and noise sensors gather environmental data for third parties, such as city planners

Cellular connectivity allows micromobility companies to optimize their offering. Location-aware connected units allow them to mitigate risks, such as setting up safety zone to enforce low speeds and recovering abandoned scooters.  Additionally, micromobility companies can contribute to smart city planning and transit improvement through gathering valuable data which shows traffic patterns and commuter trends around a city.

Despite micromobility having a positive impact on things like city gridlock, there are also some safety concerns. Accidents are not unheard of, and the majority of accidents are suffered by people who had no previous experience with e-scooters. The industry has responded by introducing information and safety training videos, but more importantly, they are working with municipalities to implement geo-fencing parameters that enforce good habits, such as not allowing e-scooters to operate outside of bike lanes.

Additionally, the misuse of micromobility has been something of a nuisance for cities, where it has been common to find an e-scooter dumped in the middle of a sidewalk or other inconvenient spots, creating a hazard for pedestrians. Cellular connectivity gives fleet managers a bird’s eye view of every device, allowing them to proactively monitor and track the fleet and address challenges quickly.

And finally, IoT cellular connectivity enables expansion of environmentally friendly urban transportation by providing reliability, transparency, and flexibility. Fleets are easier to place wherever needed, and maintaining the subscription-as-a-service model benefits consumers by giving them an affordable transport option that also reduces their individual environmental impact.

If you would like to learn more about how IoT can enable your business, please get in touch.

Learn more about how IoT enables mobility

IoT and digitalization continue to impact nearly every industry and retail is no different. While retailers have been working with RFID for quite a long time, new and improved IoT technologies are giving retailers the opportunity to improve operations and enhance customer experience, whether that’s in your brick-and-mortar operation or your e-commerce side of things. From reducing inventory error and optimizing supply chains to decreasing labor costs and reducing theft, IoT can benefit both customer and business owner in myriad ways. 

Here are seven ways IoT is enabling and enhancing retail:

In-store data collection

Smart sensors allow retailers to track foot traffic and shopping behavior, which offers a number of benefits. First, understanding traffic flows allows businesses to evolve store layouts and stock placement to data-driven merchandising, as well as pairing products and placing them where they can easily be found by the customer.  Brands also have the opportunity to identify traffic hotspots, allowing them to strategically place promotional material or advertising in spaces where shoppers frequent, creating more awareness with less effort.

Automated checkout

Let’s face it: no one likes to stand in long lines waiting to pay. Long lines not only lead to lost customers in the moment, they can also deter customers from returning to your store. That said, adding more staff to handle the problem isn’t always the optimal solution. While self-checkout has helped ease the problem to an extent, IoT-enabled checkout systems are the real game-changer. An automated checkout system reads tags on each item a customer has put in their basket as they leave the store. So, instead of checking out at the counter with an employee or going through a self-checkout line, the automated checkout system takes note of the items and deducts the cost from the customer’s mobile payment app. The result is quicker purchases, happier customers, and reduced costs for the retailer.

Smart shelves

Inventory management is a time-consuming task, but a vital one in order to make sure that items are not out of stock, misplaced, or stolen. Smart shelves help you track inventory and get an alert whenever stock levels are funning low or when an item is misplaced/placed on a shelf incorrectly. IoT sensors allow you to gather information and data on each product, which not only helps you monitor stock levels, but also detect in-store theft.

Personalized discounts

Loyalty programs and discounts are an ideal way to show appreciation for returning customers while also ensuring their loyalty. IoT sensors placed around a store can distribute loyal discounts to loyalty program members via their smartphones when they stand near discounted products. Additionally, IoT can track items that a customer has been looking at online, sending them a personalized discount when they visit the store. So, instead of offering general discounts on numerous random products, each discount can be tailored to individual customers, maximizing conversion rates.

Optimized store layout

Planning store layout can be tricky, but through the use of IoT data and analytics, a store’s layout can be optimized not just for the retailer, but for the customers too. This not only enhances customer experience, it also increases profitability. Deploying sensors across aisles can help retailers place products in relation to customer behavior, including placing the least in demand products front and center and the most popular ones further to the back. The data gathered also provides insights into customer behavior and shopping preferences.

Food safety monitoring

Food and beverage retailers know that efficient operations are crucial when it comes to offering their customers products that are fit for consumption. Establishing and maintaining an efficient operation, though, can be challenging and one impacted by any number of factors. Anything from an electrical outage to staff error can lead to stock contamination, spoilage, and loss – costing you money. IoT sensors can prevent loss and mitigate human error by monitoring perishable goods in real team. They can automatically log temperatures in prep areas, fridges, freezers, and other equipment, setting thresholds for each sensor and receiving an alert any time a threshold is breached. This helps protect inventory by ensuring food storage areas remain temperature compliant.

Supply chain optimization

Managing customer expectations is crucial in retail and IoT allows retailers to do this through up-to-date insights into inventory availability. Starting in the warehouse, IoT-enabled sensors on product shelves can monitor weight fluctuations that signal when products are running low. This ability to recognize the popularity of particular goods – such as the ones that are flying off the shelves – allows retailers to proactively restock in good time. This is increasingly important as more and more customers move to online shopping – physical inventory isn’t visible, so the ability to know when to restock before someone purchases an item that isn’t available lowers the risk of transactional error. Additionally, warehouses are big and finding a particular product can be like finding a needle in a haystack – deploying sensors in your warehouse leads to greater overall visibility and streamlined processes.

Learn more about how IoT can enable your business

In a world where we are continually faced with floods of information coming at us from all directions, it’s more important than ever to deliver messages that break through the noise and capture the attention of your audience. Gone are the days of the passive and static billboard on the highway or in a shopping mall – today, there is a fast-growing demand for digital displays that deliver high quality, high-resolution content everywhere from public spaces to restaurants to shops. The demand to be flexible in order to quickly pivot both your message and where that message is seen and heard mean cellular IoT connectivity is the right choice when it comes to connecting your digital signs

Not all that long ago a digital sign was simply a digital replacement for a static sign. The signs weren’t ‘smart’ and they didn’t really do much more than passively display information. These days, digital displays are both interactive and dynamic, and they are connected to other resources or devices to provide near instant access to relevant and often personalized information. This leads to streamlined communication, differentiation from competitors, and often an improved bottom line.

But as digital signage evolves, new needs are emerging, calling for even more agile and dynamic solutions. This is where IoT brings real value. Businesses need simple, integrated solutions that offer the flexibility and freedom to customize their content and narrative without the need to constantly update their systems or lay out a lot of money.

So, when it comes to connecting your digital signs, it’s simple:  SIM-based cellular connectivity does away with the need for time consuming and complex on-site setups that you get with hardwired networks. By empowering digital displays with SIM cards, digital signs can be installed anywhere in the world where cellular networks exist – which means pretty much anywhere. You simply deploy your device, activate your SIM, and off you go, bringing your message to the audience you want, where you want.

Digital signage benefits

There are any number of benefits to connecting your digital signage, but these are the most critical due to broad applicability and relevance across most industries:

Enhanced engagement

Digital displays capture nearly 400% more views than traditional static displays. How does this impact your business? More views mean more opportunities, and more interest means more customers at your door, all of which can lead to more sales. Essentially, moving images attract eyes a lot faster than a static image.

Speed

We all know that time is money and the difference between traditional signs and digital signs is like night and day. Unlike with the old signs, digital displays don’t need to be printed, posted, and lived with for days or weeks on end, only to go through the process all over again when you have some new content. With digital signage, you can change your content in the blink of an eye, tailoring your message where and and when needed.

Greater customer satisfaction

From helping customers find their way to improving information accessibility, digital signage enhances customer experience in myriad ways. In fact, according to Digital Signage Today, customers who interact with digital signage have 46% high satisfaction, with managing queues by displaying estimated wait times and alerts when it’s a customer’s turn reducing perceived wait times at checkout by as much as 35%. All of this leads to increased customer retention.

Increased revenue

When it comes to retail, you can take advantage of your digital real estate in high-traffic areas by selling advertising space to well-chose third-party companies. These could be brands you offer in-store or businesses with complementary products and services. Of course, over-using this tactic can have the opposite effect: a few, well placed ads can be a bonus – a deluge could degrade the experience.

If you would like to learn more about how IoT can enable your digital signage, please get in touch. You can also learn more about how digital signage works in practice here.

Learn more about how cellular connectivity and IoT can enable your business

IoT is one of the driving technologies behind the smart city concept and is poised to be a key component in facilitating sustainable urban development. More than half of the world population lives in urban areas today and cities account for more than 70 percent of global carbon emissions and 60-80% of energy consumption. As urban populations have increased, services have overall deteriorated in terms of both quantity and quality, with rapid urbanization giving rise to increased challenges around things like traffic congestion, water contamination, and most importantly, social inequality.

Municipalities are leveraging IoT technology to connect devices, infrastructure, and people. It is being used to address challenges that range from waste management and water conservation to traffic, air pollution, and power grids. By leveraging IoT technologies, cities are able to successfully manage their growing populations by improving quality of life and the efficiency of urban operations and services, while also increasing competitiveness and addressing economic, social, environmental, and cultural needs.

Let’s take a closer look at a few areas where cities are leveraging IoT technology to address challenges, and how things could play out as solutions evolve:

Transportation & traffic

Among the key goals of any public transport system are greater efficiency and reliability – and smart technology is the key to enablement. There are a number of areas where IoT is particularly helpful:

• Toll & ticketing

More people in our cities means more vehicles on our roads – and an increase of vehicles means queues at toll booths. While automated tolls, using an RFID (Radio Frequency Identification) tag, have already improved the flow of traffic, further improvements are possible through the use of IoT technology. Many of today’s vehicles come equipped with IoT connectivity, which allows a car or truck to be detected up to a kilometer away from a tolling station. What this means in practice is that the car or truck can be identified long before it approaches a toll booth – so when the vehicle finally gets there the barrier automatically raised for the vehicle to pass through. For older vehicles, a registered smart phone could serve the same purpose, taking automatic payment from the phone’s digital wallet.

• Connected vehicles

As mentioned, many vehicles today are already connected and are equipped with sensors and devices that monitor everything from brakes and the engine to tire pressure and exhaust. Going forward, connected vehicles will use in-vehicle networks, radar, and cameras to help detect and communicate with one another, prevent collisions, and promote smooth traffic flow. Vehicle tracking systems are already being used within the freight and rental segments, monitoring driver behavior and collecting data on things like idling time and fuel consumption.

• Public transport management

IoT technologies are already widely used in public transport, including for integrated ticketing and automated fare collection, passenger information, and display systems. IoT can also be used for real-time vehicle tracking, which allows public transport agencies to communicate better with customers about things like arrival and departure times. Datal analysis and real-time management allows transit agencies to monitor progress in real-time and make adjustments for unpredicted incidents, such as accidents, roadworks, station closures, etc.

Smart lighting

The majority of city dwellers spend more time indoors than outdoors, which can have a significant impact on energy consumption. The use of electricity for lighting can be significantly optimized with the use of intelligent systems. Natural light cycles can be mimicked by incorporating light and temperature sensors, while light sensor-based applications can be used to manage the orientation of solar panels for optimal usage of natural resources.

If we look at street lighting, the savings and benefits are clear:

• Dynamic dimming

Intelligent streetlights adjust light levels based on specific times and events. When paired with motion sensors, light levels can be further refined. Dynamic dimming based on time, event, or human presence can result in a more than 60% reduction in energy consumption, while the use of motion sensors means when no human presence is detected, streetlights illuminate at a low, predefined level, reducing energy usage, CO2 emissions, and light pollution.

• Maintenance optimization

Intelligent streetlights mean near real-time information on each light, allowing almost instant notification of faults or errors, which allows city managers to take informed actions, while at the same time reducing the need for manual checks. This can reduce maintenance costs significantly.

• Increased public safety

Smart motion sensors trigger streetlights only when humans are detected, for example when a pedestrian or cyclist passes by, encircling them in a ‘circle of light’.  This increases overall public safety, as statistically speaking criminals avoid committing crimes in well-lit areas.

Additionally, smart streetlights offer an ideal point from which a diverse range of smart city applications can be launched, collecting a wide array of data on everything from air quality to street security to traffic patterns. Streetlight poles have an uninterrupted power supply, making it easy to power IoT devices and sensors. They are also generally spread uniformly across cities and are consistent in height, making them idea for hosting all kinds of IoT sensors and systems, removing the need to set up ad hoc infrastructures.

Healthcare

Combine a global pandemic with ongoing populations growth, inefficient patient flow, swindling staff, and a host of other challenges in healthcare and it’s clear that healthcare can use all the help it can get. Through the use of IoT, authorities can collect data to gain valuable insights, which in turn can be used for better public healthcare planning.

For patients, devices such as smart insulin pens, connected inhalers, asthma monitors, blood pressure monitors, etc. allow them to better manage and address their own health needs, as well as provide more accurate data to their healthcare providers – and also quickly access help if there is trouble. Additionally, data collection allows observation and treatment to take place, something that was previously only possible in an institutional setting. Smart devices and other connected sensors can also help with early detection.

Here are several of the ways IoT can enable better healthcare:

• Remote monitoring

Customized software and devices gathers data from remote devices in real time, allowing for a better analysis of patient’s health – and thus improved outcomes.

• Enhanced supervision & reporting

Remote supervision through connected devices can collect essential health data and transfer it to a health professionals in real time, allowing a quick response to medical emergencies such as heart failure or asthma attacks.

• Reduced costs

Connected devices and other IoT devices such as tele care allow patients to connect with their health professionals from how, reducing the need for visits to the doctor’s office for tests and checkups.

• Medication Management

There are a number of IoT solutions already helping patients better track their medication schedule, including smart pill bottles and in-home medication dispensers that also alert both healthcare professionals and concerned friends and family if there is a problem.

• Data Analysis

Data-driven insights not only speed up the decision-making process of healthcare professionals, they also allow for better public health decisions overall, whether that is where to allocate money or where to build a new hospital.

Essentially, IoT can play a pivotal role in the future of healthcare, with many solutions already available today.  It is a vast area, though, so please download our IoT & Healthcare White Paper to learn more.

Retrofitting existing building stock

Every year, nearly 5 billion square meters of buildings are retrofitted. Retrofitting existing building stock is an effective approach when dealing with limited budgets, aging structures, and energy accountability, as it helps reduce energy costs, improves equipment performance, and extends the lifetime of the building.

If we look closer at energy, in the EU, buildings are responsible for 40% of total energy consumption and 36% of greenhouse gas emissions. Retrofitting ageing building stock presents a major opportunity to not just reduce carbon emissions, but to also reduce operating costs and provide more comfortable and healthier buildings for citizens. Retrofitting also has significant job generation potential.

Before IoT, tracking and collecting building performance data was a manual job – and it was tedious, inaccurate, and a slow process. Now, with IoT sensors and the data generated, it is possible to monitor and track a building’s performance in near real-time, giving crucial insights on the go, which leads to better outcomes.

When IoT sensors and smart technology are introduced into the picture, you can monitor and control the use and operation of building equipment, such as HVAC systems, lighting, and plug loads, you also get real-time data, all of which leads to detection and diagnoses of faulty equipment, energy efficiency, and even enhanced profitability.

These are just a few of the ways IoT is enabling smart, sustainable urban development. To learn more, download the Tele2 IoT Smart City White Paper, which covers this topic in depth. You are also welcome to contact us to learn more about how IoT can help your community address your challenges.

Learn more about how IoT can enable your business or community

Logistics is complex and involves the coordination of multiple elements. Today, with increasing demand for online deliveries, shorter delivery cycles, growing competition, and shrinking margins enterprises are under more pressure than ever to ensure that their logistics management is streamlined and efficient. Digitalization and the introduction of IoT technologies has allowed the industry to experience a huge increase in efficiency: optimizing processes, staying competitive with market rivals, increasing quality of service, and keeping costs under control.

With IoT, businesses are able to integrate assets within the supply chain into a single system. Data collection and tracking capabilities are providing visibility across the entire value chain to enhance and improve everything from warehouse efficiency to fleet management.

So, why invest in an IoT logistics solution and why integrate connected technology into your operations. Here’s why:

Warehouse & storage

With IoT, you can be aware of every moving part in your warehouse. Connected sensors can keep tight control over your inventory by tracking and analyzing inventory positions and stock levels across your operation. Smart shelves provide inventory information, alerting you when stocks are low, products are displaced, temperatures are unsuitable, when there is theft, etc. Additionally, wearables allow you to track employee health, location, and performance, as well as report collisions and falls, improving safety across your operation. IoT sensors can also track operating conditions of machines and other equipment, allowing for maximum productivity, as well as predictive maintenance – which reduces costs of repairs and keeps downtime to a minimum.

End-to-end product tracking

Transparency is the name of the game when you integrate IoT-technology into logistics. An IoT tracking system allows logistics managers to track any product’s movement from the warehouse to your customer’s doorstep. This establishes transparency, reduces human error (and the resulting pressure on staff), and increases customer satisfaction. Real-time delivery tracking becomes seamless and reduces headaches for everyone because you will be able to tell any customer calling to find out where their delivery is exactly where it is and when it will arrive. This also saves on time for your customer service reps, who can easily pinpoint exactly where a delivery is.

Fleet management

An IoT-based vehicle tracking and management system allows you to easily monitor your fleet. IoT devices provide accurate data so you can save time and money, as well as reduce downtime – and in the end that means better, and more-data driven business decisions.

  • Engine performance
  • Fuel consumption
  • Location-based information
  • Driver behavior
  • Predictive maintenance

Forecasting accuracy

With all that data being generated and analyzed, you will be able to get a very clear picture on everything from how much time it takes to sell a given amount of product and how to optimize deliveries of that product to which vendors have better track records and which distribution centers have higher conversion rates. The result? Much better accuracy when planning operations and predicting outcomes. By moving you to data-based decision making, human error is significantly reduced. And all that automatic data collection means you not only save on manhours that would previously been spent manually collecting data, you can also collect data that would have been difficult or impossible to collect without IoT.

If you would like to learn more about the benefits of IoT in your logistics operation, please get in touch..

Learn more about how IoT can enable your business solution

Learn more about how IoT can enable your business

Moving from products to services – servitization – is something we in the IoT world have been talking about for a long time. Now, with digitalization in manufacturing well underway, more and more companies are understanding the benefits of making this move. Of course, it’s no secret that the subscription economy has impacted how we consume everything from music and movies to cars and printers. The subscription business model/servitization moves away from one-time transactions and instead allows companies to build loyal, long-term relationships with customers, delivering customer-centric services while also creating predictability. According to the Subscription Economy Index, companies that moved towards a subscription-based business model grew six times faster than traditional businesses in 2020.

The benefits of servitization are myriad. The first and perhaps most important benefit is that it allows you to meet customer demands, which ultimately leads to greater customer retention, something we all need to focus on as customer requirements increase. Another benefit is that customers only pay for the value received from a supplier, while the manufacturer no longer has to focus solely on units sold, and instead builds a profitable business from regular streams of additional, incremental revenue. Additionally, useful insights into future R&D processes can be gained by analyzing the performance of a product and using this information for continuous improvement.

quotes icon

Servitization is not about new pricing models or financial constructs, it’s about creating a new relationship with customers, one built on loyalty and one that requires companies to no longer focus solely on consumption, not on units sold.

When it comes to manufacturing, the question is if this customer-driven model works for Original Equipment Manufacturers (OEMs), where customers can ‘rent’ or gain access to machinery and industrial equipment for a recurring fee or subscribe to various add-ons? Through the use of IoT-enabled sensors and devices, the answer is a resounding yes.

A good example of this is Rolls Royce’s TotalCare program for aircraft engines. The company no longer simply sells engines to airlines. Instead, it invoices them on a Power-by-the-Hour basis, while continually monitoring the engines. This means airlines no longer need to buy, operate, or maintain engines, nor do they have to train personnel on repairs, or purchase and store spare parts. Instead, if an engine needs servicing, Rolls Royce takes care of it. And if the engine breaks down? The responsibility again falls on Rolls Royce. This allows both the airline and Rolls Royce to focus on what they do best: the airline moving passengers from point A to point B and Rolls Royce delivering a reliable service for its engines.

Rolls Royce is able to do this through embedded machine sensors and devices, which provide a steady stream of data on aircraft engine health metrics. In other words, the data that is fed back to the manufacturer provides information on the condition of parts and the overall product, allowing Rolls Royce to engage in predictive maintenance – i.e., address any challenges such as wear and tear or even potential failures long before they ever become a real problem, or, should anything break unexpectedly, Rolls Royce is automatically notified, allowing them to respond quickly.  This keeps equipment in service and also leads to an extended lifecycle, so it’s win-win for both Rolls Royce and its customers.

There are a number of compelling reasons why manufacturers should consider servitization:

Revenue growth & profitability

By adding services to your offering, you increase your number of revenue streams and those become recurring. Complimenting your existing product portfolio with ongoing services to your customers allows your income to become more predictable and secure, which in turn helps insulate you from fluctuating market conditions or a slow sales month.

Equipment complexity

We all know that machines and other equipment have become increasingly complex and technical, and it isn’t really possible for all customers to have the required level of expertise to effectively maintain their equipment. You, as the manufacturer, have the requisite knowledge and experience needed to not just understand how to operate and perform maintenance on machines, but to also advise on how to best maximize performance.

Improved customer outcomes

Focusing on solutions instead of products allows you to think in terms of your customers’ needs and goals, which means you can adapt products and services to help them achieve those outcomes, as well as helps you to respond faster to issues and challenges that may arise. The resulting increase in customer satisfaction builds a stronger relationship and increased loyalty.

Higher entry barriers

The more established your relationship with you customers, the more difficult it is for someone to come in and steal market share. Servitization means your customers benefit from your support and knowledge in real terms, every day.

If you would like to learn more about how IoT can help your business, please get in touch.

Learn more about how IoT can enable your business

Industrial IoT (IIoT) leverages connectivity to optimize manufacturing and industrial processes through the use of smart sensors and devices. IIoT enables end-to-end visibility of the production process, and the network of connected devices, smart machines, and real-time analytics produces a slew of data – both real-time and historical – that brings new levels of productivity, efficiency, and cost savings.

Here are just some of the benefits Industrial IoT brings:

Remote Monitoring

Remote monitoring allows you to visualize, track, and control both your facility and your assets without having to be onsite. Through the use of IoT technology, you gain greater visibility into things like asset performance, resource consumption, and equipment lifecycles and functionality.

Predictive Maintenance

More than 75% of equipment and system failures occur without notice. Through the use of sensors, IIoT does away with scheduled – often unnecessary – maintenance; instead, you are able to identify anomalies or problems with your equipment in real-time, allowing you to address challenges swiftly and minimizing downtime. This improves productivity and helps you to avoid costly repairs, while making better use of your maintenance staff.

Improved Workflows & Processes

Monitoring the entire production line helps identify bottlenecks, process gaps, and other challenges that can delay production, while also enabling more efficient planning and optimization of any line’s accuracy, speed, and production volume.

quotes icon

With IoT sensors monitoring your entire line, planning becomes more accurate, and workflows and processes improve.

Reduce Human Error

Real people will continue to be essential for many tasks, but IIoT will bring digitalization to every step of your operation, leading to a reduction in manual processes and interventions. Smart sensors deployed across your factory floor will provide constant feedback. So, for example, if there is an accident, the entire facility can be alerted to potential hazards, while machines will automatically halt, and maintenance staff dispatched. Wearables can also be employed, such as smart wristbands that feature sound pressure level sensors that warn staff of loud areas where hearing can be damaged. Smart hardhats can track not just the wearer’s location, they can also monitor heartrate, temperature, and humidity – and even warn wearers of dangers such as heatstroke long before any symptoms arise.

Sustainability & Energy Savings

Industrial accounts for 54% of global delivered electricity, which means it’s not great for sustainability and it’s not great for your bottom line. Continuous monitoring of your setup via sensors and devices can expose wastefulness due to inefficiencies.  IIoT also allows you to predict energy demands and optimize future energy consumption – and this includes not just managing your equipment, but your overall operation, such as managing building temperature, water usage, humidity, and lighting. Additionally, as IoT technology evolves, sensors are using less energy, another bonus for your bottom line.

Learn more about IoT

IoT continues to drive the digitalization and datafication of both businesses and society in general. Connected healthcare, autonomous robots, smart farming… everything around us is being connected and as IoT technologies continue to mature, further benefits will be found, particularly with 5G and LTE-M as drivers.

So, as we move into massive IoT, what are some of the biggest trends we can expect to emerge or mature during 2022?

Healthcare

IoT has been enabling healthcare for a number of years already, and with the global pandemic still a reality, further innovations will emerge.  Connected healthcare is a broad use case, of course, encompassing everything from fitness trackers and remote monitoring to connected medical centers and telemedicine. The advances in connected healthcare have led to improved outcomes and better quality of life for patients.

One continued trend within healthcare will be the use of IoT devices to collect data on patient conditions. Using IoT devices means avoiding bringing large numbers of potentially infectious people together in close quarters, something that is critical during a pandemic. IoT devices and telecare will also allow doctors to continue to provide medical attention to a greater number of patients without the risk of infection via in-person visits Additionally, IoT devices will make healthcare available in more remote areas where there is less access to doctors or medical facilities. And speaking of medical facilities, IoT technology will be further integrated into everything from wheelchairs and defibrillators to oxygen pumps and even soap dispensers to ensure smoother operations at facilities.

And even connected drones are getting into the healthcare picture: Swedish company Everdrone, which delivers defibrillators via drone, recently delivered an emergency defibrillator in just three minutes. The connected drone was carrying a lightweight and easy to use defibrillator that arrived on the scene faster than first responders, something that surely saved the 71-year-old man’s life. These kinds of connected technologies will continue to expand within healthcare, leading to more successful outcomes, particularly in emergency situations.

5G growth

5G and IoT go together like peanut butter goes with jelly – and with 5G expansion will continue to accelerate IoT adoption in 2022. Why? Because successful IoT solutions increasingly require low latency and hyper connectivity, two things that 5G technology brings to the IoT table. As 5G coverage expands and 5G roaming agreements are hammered out, businesses will be able to offer services that would previously have been too costly or logistically difficult. Faster data transfers, increased coverage, and energy efficiency will become prime drivers of IoT growth and development.  That said, security concerns will continue to need attention, which means enhanced security will be another trend during 2022.

Security

Security has always needed to be top of mind when it comes to IoT and the expansion of 5G is only going to increase the need for enhanced security, in part due to the resultant increased number of IoT devices and thus attack surfaces.  The first half of 2021 saw 1.5 billion attacks against IoT devices, and this trend will not subside if security doesn’t become job one. Given that roughly 15% of businesses deploying IoT have not updated their security protocols and that there are very few government standards requiring businesses to stay on top of cybersecurity, it is imperative that IoT providers take up the slack and ensure their customers’ IoT solutions are not vulnerable.

The good news is that everyone from connectivity providers to hardware manufacturers are taking security much more seriously, and they are making sure that customers do as well. Additional layers of security are being added and the data collected from connected devices can actually be used to predict and prevent cyberattacks. There will be even more focus on cybersecurity tools in 2022 and businesses will increasingly understand that addressing cybersecurity is an essential part of their IoT solutions.

Sustainability

Sustainability will continue to be an important technology trend, with IoT in particular being used to facilitate any number of use cases. Everything from optimized fuel consumption in transportation to controlling, measuring and managing renewable energy sources such as solar panels will benefit from IoT solutions. Taking regular temperature and soil humidity measures in forests to prevent potential forest fire, utilizing water level sensors to enhance flood warning systems, using sensors on streetlights to measure and collect data about air quality – the possibilities will continue to grow during 2022.

Manufacturing

The manufacturing industry has always been a bit slow in adopting new technologies and IoT is no different – but 2022 will see that change. Manufacturers are now clear as to how IoT can benefit their setup and save them money. From preventive maintenance that reduces or eliminates production delays to enhanced operational efficiencies and improved safety – IoT brings a lot of benefits to not just the factory floor but also to the C-suite. You can learn more about the Internet of Industrial Things (IIoT) in the Tele2 White Paper.

It’s not always crystal clear how your particular IoT Journey will look. The steps you take along the way may follow a clear path, or you may take unexpected turns as your business grows and evolves. One thing is clear, though: with the right support and services you’ll get the most from your IoT journey, no matter where it takes you.

When you started your IoT journey you probably had a business case that would best be realized by connecting things. Everyone’s experience is different and sometimes, when devices are first deployed, controlling that deployment is not at the top of the to-do list;  maybe the deployment wasn’t so big that it needed many changes so contacting the help desk for any changes was all you really needed. It was relatively simple, and you were just happy to have coverage.

Now you had more control and started optimizing your costs, and maybe even started to see the possibilities of new revenue streams, due the data you had. Time passed and new requirements made you reconsider your connectivity provider or your choice of connectivity technology, meaning you now had not one or two but three (or even more) legacy deployments.  Your choices now have you on three parallel IoT journeys, but that’s what customers wanted, right? Complexity was increasing, overview and control was hard, not to mention all those issues with data layers. The need to unify and simplify them became apparent and you began using products that helped you do that.

Once your connectivity was unified you continued to grow, again deploying more devices and getting more data and it’s at this point that you saw that you needed to get deeper into business analytics and get better insights into how your devices were performing – after all, big data is a hygiene factor these days. Online GUI is great, but you want those insights and data delivered straight into your own systems. API and streaming are the way forward, and you now need smarter connectivity.

quotes icon

IoT is not a race – but you do need to stay one step ahead of the competition. Developing the right solution with the right tools at the right time is the key.

Because you were determined to get the most from your IoT deployment you made it smarter and in turn, your business continued to grow. You might have started with 500 devices but now have 50 000 or even 100 000+ and are deploying in places you wouldn’t have dreamed of a few years ago – but which come with their own regulatory challenges. At this point you have a completely different set of requirements from both a global connectivity perspective and a quality perspective. You require low latency and probably attractive pricing beyond the retail offer.

Fragmented technologies, unpredictable connectivity costs, and regulatory difficulties might be just a few of the challenges you’re facing.  And the off-the-shelf connectivity everyone is offering is no longer enough for deployments of this nature. You need something bespoke that is tailored to your needs, but you don’t want to be heavily investing in building up an IoT/Telco company inhouse to deliver all of this – you want it delivered as-a-Service.

You’re always going to need your global SIMs with roaming agreements, you’re still going to need analytics, and you will always need to unify because who knows what technology lies around the corner? Your choices now should future proof your IoT solution, no matter what comes tomorrow .

The good news is that if you’ve made considered choices along the way you have already implemented technologies, products, and services that build upon one another, so as you reach unicorn status it’s really just a matter of adding that final layer that will make everything you’ve built work in harmony, like a well-oiled machine.

Building from the bottom up and adding layers where and when needed will take a lot of pain out of your IoT journey. With Tele2 IoT it doesn’t matter where you are in your journey – our solutions are built like legos stacked on top of one another: they fit with whatever you are building, whether that’s getting your deployment off the ground, unifying an already-complex solution, or giving you the tools you need to manage your global deployment in one consolidated access technology-agnostic platform.

Learn more about how IoT can enable your business

While drones have long been associated with costly military applications or, on the other end of the spectrum, hobbyist tech gadgets, these days they are increasingly being shaped by practical commercial applications. In recent years, drone usage has broadened across a wide range of industries, being used for everything from delivery, infrastructure and crop monitoring, and mapping to industrial site inspection, emergency response, and security surveillance. And as more and more industries discover the benefits drones bring to their businesses the use cases will continue to grow, with IoT technology bringing cost and operational efficiency.

Drones have been around for a long time, with the concept of Unmanned Aerial Vehicles (UAVs) stretching back to 1849, when Austria attacked Venice using unmanned balloons filled with explosives. But while militaries around the world have largely driven drone technology since then, drones have also moved powerfully into both consumer and commercial spaces.

quotes icon

When it comes to drones being deployed in the business space, IoT is increasingly a part of the picture. IoT-enabled drones have the ability to perform any number of important tasks, particularly when those tasks are expensive, dangerous, or impossible for humans to carry out.

Logistics

In the US alone, the Delivery Drones Market grew from $40 million to $1 billion between 2012 and 2017, with that number doubling by 2020. By 2026, it is expected to reach $5.6 billion.

Last mile delivery is the most expensive and difficult leg of a package’s journey, making up around 50% of total distribution costs. Drone technology optimizes last mile delivery by transporting packages from nearby warehouses or distribution centers to a specific address.

And unlike traditional delivery vehicles, drones can ‘fly as the crow flies’, allowing them to avoid traffic and or circuitous delivery paths. Drones are also fast, making same day delivery the norm in many areas – and in some cases even making ‘same hour’ delivery a possibility.

This also means there are environmental benefits when drones are used for delivery: the average delivery of a package by truck creates around 1kg of greenhouse gas emissions. Drones, on the other hand, reduce both energy consumption and the release of greenhouse gasses, because they generally run on battery power. If those batteries are charged with green energy, the substantial amount of carbon emitted from commercial and industrial transportation will be significantly reduced.

Beyond deliveries, drones will increase warehouse efficiencies, circling the perimeter of warehouses to conduct safety inspections, while also supporting inspections, preventative maintenance, and the repair of complex machinery within a manufacturing plant. Drones can also be used to speed up pick and put away processes, with lightweight drones being as an alternative to conveyer belts or forklifts for retrieving and putting away orders.

And finally, intelligent drones are crucial where other modes of transport are not viable, such as delivering vital relief and medical supplies to disaster zones or in other emergency situations.

Agriculture

With the global population expected to hit 9.6 billion by 2050, innovative agricultural practices will be vital in order to feed everyone. Smart drone tech will enable the application of precision agriculture techniques, which ensure efficiency of inputs such as water and fertilizer, while maximizing productivity, quality, and yield. Precision agriculture also helps minimize pests, unwanted flooding, and disease. In other words, drones are revolutionizing agriculture and offering major costs savings, enhanced efficiency, and increased profitability.

Drones can carry out comprehensive monitoring of crops and livestock conditions, with the ability to quickly spot problems that might not be apparent from the ground. By quickly surveying wide swaths of farmland, drones can map the property, predict and monitor crop growth, report on crop health, monitor irrigation, and improve spraying accuracy. Just one example would be time-lapse drone photography revealing that a crop is not being properly irrigated.

The ability to collect and analyze data in real time has very tangible outcomes: better crop yield, better use of resources, and data-driven decision making. Additionally, with the ability to identify pests, weeds, diseases and nutritional efficiencies in the early stages, there is a reduced need for harmful pesticides and other chemicals.

You can read more about IoT and Agriculture here.

Industrial applications

Inspection and maintenance of industrial facilities can be both challenging and dangerous. Things like boilers, furnaces, mines, power grids, seaports, oil and gas – these all have areas that can be hard to access and can pose health hazards to workers. Smart drones, though, expedite maintenance and inspections in a much safer way: through the use of sensors and cameras, drones gather data which is then relayed in real time to an inspector, who can then act on that information in a safe and secure way.

quotes icon

By deploying drones during various phases of a facility’s lifecycle, the data gathered can be used to improve and optimize industrial processes, as well as enhance operational efficiencies. And because of their nearly limitless visibility, drones are uniquely qualified to capture aerial data in real time, enabling rapid and seamless data collection, which in turn fuels informed business processes.

Drones can be used in operations such as oil and gas facilities for security, surveillance, emergency response, and infrastructure inspection. At seaports, operational oversight, port monitoring, traffic control, mapping, and surveying can all be performed by drones. When it comes to mining, drones have a number of applications, such as mine surveying, inventory management, stockpile estimation, and hot spot detection. Additionally, drones can provide detailed information about potential sites before a mining project is begun. Drones can also access high-toxic and/or hard to reach areas and can be a vital tool in emergency response.

Construction

The construction industry is already investing heavily in drones and is one of the main adopters of the technology – and with good reason. Drones provide a birds-eye view of construction sites, machinery, and people, providing crucial information before, during, and after a project, as well as monitor its progress. Drones have access to places that are normally inaccessible or dangerous to inspect, such as roofs, recording and relaying real-time data and reducing accidents while increasing site safety.

Traditional land surveillance methods require a lot of labor, time, and money. Drones, on the other hand, provide valuable information on terrain and land distribution at a fraction of the cost. They do this by having a bird’s eye view of the entire site, inspecting the land with a much higher accuracy than previously possible, with the data collected being used by engineers to measure things like land dimensions and elevation changes.

When it comes to existing structures, 3D models can be created from scans made by drones, which can be helpful when it comes to renovations and retrofitting, as well as for inspections, potentially avoiding disasters such as the recent Surfside condo collapse in Florida. Data can also be converted into building models, allowing clients to have a better understanding of spaces and a view of final outcomes before the construction work even begins.

One of the more common drone applications on construction sites is supervision and progress checkups throughout the lifespan of the building project. Drones monitor progress by overlaying captured images onto building designs and drawings, allowing confirmation – or not – that the project is moving forward according to plan. The images can also be used to identify flaws and help eliminate human error when it comes to quality inspection and supervision.

Post-construction, drones can assess damage following natural disasters such as hurricanes or tornados, identifying the extent of damage and pinpointing which areas need immediate attention. They can also be used to identify victims and guide emergency workers in a safer manner.

Speaking of safety, construction sites can of course be dangerous places. Inspections carried out manually can expose workers to accidents and injury, particularly when heights are involved. Drones remove or reduce risks while also providing a higher level of inspection accuracy.

There are myriad other commercial applications for drones, such as sewer maintenance, insurance, filmmaking, and public safety. The use cases will continue to grow as the technology evolves. When IoT is added into the mix, the possibilities will become nearly endless.

If you would like to learn more about how IoT can enable your business, please get in touch..

IoT plays a crucial role in enhancing smart city applications through real-time monitoring and management of city processes. But with almost two-thirds of the world’s population predicted to be living in urban areas by 2030, one of the biggest challenges cities will face is waste disposal. The world produces 2.01 billion tons of solid waste annually, with the amount of garbage produced by urban dwellers on track to reach 3.40 billion tons by 2050. Waste disposal expenses are on the rise as well, with the World Bank predicting global garbage collection costs to top $375 billion in the next five years. Fortunately, smart city initiatives are driving innovation in the waste management sector. Valued at just under $1.5 billion in 2018, the smart management market is projected to top $5 billion by 2025.

Smart waste management has become an essential part of the smart city ecosystem, with IoT-enabled smart waste sensors enabling cities to optimize waste collection, reduce the number of overflowing bins, and manage resources. The use of IoT in waste management has the potential to reduce unnecessary expenses that are the result of operational inefficiencies in trash collection processes.  The number of smart bins is expected to reach 2.4 million by 2025, and according to Berg Insight, the rapid adoption of smart waste sensors will result in 29.8% growth through 2025.

Smart waste bins rely primarily on cellular networks, which accounted for about three quarters of connected waste collection points in 2020. While existing units can be retrofitted, wireless sensors are increasingly being pre-integrated into waste bins. And it’s not the conventional cellular technologies – 2G/3G/4G – that are driving growth. Instead, it’s LPWA (low-power, wide area) technologies (LTE-M and NB-IoT) that are leading the way. These technologies offer cost and power-efficiency options that leverage existing networks while also having strong built-in security, making them ideal for smart city applications.

There are three critical areas where IoT enables waste management processes.

Route optimization

Traditionally, waste management systems have used a pre-defined route based on historical patterns to schedule garbage collection and recycling point receptacle emptying, whether they were full or not. IoT devices turn this model on its head by using smart trash bins to detect location, temperature, and fill level in real time, and this data is then used to plan optimal collection routes, resulting in an efficient pickup process that saves fuel as well as manpower. Additionally, datahelps with long-term planning, such as where more bins are needed or where the number can be reduced.

The data gathered from smart bins also reduces the number of pissed pickups or the incidence of overflowing trash bins. If a sensor detects that a bin is full, an automatic alert will be sent to waste managers, who can schedule an extra pickup.

Smart recycling

According to a report from the UN, 50 million tons of e-waste is generated every year. And as the number of electronic devices ending up in landfills is increasing all the time, e-waste has been identified as a key aspect in solid waste management. Discarded electronic devices often contain harmful chemicals, such a lithium from a smartphone battery, which can leach into groundwater. At the same time, these devices present an opportunity to reclaim precious and base metals, such as gold and copper, in an efficient way. IoT management systems allow for a digital record to be made of devices and batteries and once the battery dies, the location of phones, IoT sensors and other electronic devices can be activated, with manufacturers or waste managers scheduling a pickup – and even bringing a replacement, long before they ever end up in a landfill.

The ability to embed IoT technologies into receptacles also allows for the use of machine learning, AI, and computer vision that can process the type of material in the container, leading to better sorting and reduced human error, as well as an easier job downstream at recycling centers. Additionally, emerging smart bins are able to identify and sort waste into categories like glass, paper, plastic, and metal, compress it and notify sanitation workers of fill levels of each waste category, enabling a more sustainable society.

Data analysis

Connected devices record the speed at which bins fill up, while also monitoring how often they are emptied, and what they contain. IoT management systems are where all of this comes together and shines. Data unlocks endless possibilities, such as planning better distribution of bins, eliminating incorrect disposal practices, and even reducing the amount of waste that ends up in landfills.  Data analytics can help assess trends to better plan waste management processes, leading to a better allocation of resources and a happier populace. And speaking of that happier populace, a smart city app can give citizens the ability to input on-the-ground information, which can be used both in real time, such as when someone reports a smashed bin or similar, as well as adding that data to data collected from other sources, which can further optimize processes.

If you would like to learn more about how IoT can enable your smart city or business, please get in touch..

Learn more about how IoT can enable your business

Even before Covid-19, charities were struggling to embrace digital technology. The global pandemic, though, has made it abundantly clear that digital technology will be crucial to the sector’s efforts going forward. The impact of Covid on the charity sector has been two-fold: there has been a sharp increase in demand for charitable services such as food banks, support services, and animal charities, while at the same time there has been a notable drop in donations. Covid-19 restrictions have limited face-to-face fundraising or canceled them altogether, while countertop fundraising in shops has also taken a significant hit, due to both Covid restrictions and people being encouraged to pay with card.

The good news is that while the ongoing challenges facing society in the wake of Covid will continue to impact charities, many are seeing the opportunity to take advantage of advances in technology. IoT has made its way into nearly every industry and for the non-profit sector, IoT is enabling charities to offer better services while also changing how they fundraise.  Here’s how:

Cashless donations

A lot of people don’t carry cash anymore, with some countries such as Sweden teetering on the edge of becoming a truly cashless society. While some charities have already adopted wireless card donation terminals, cash-only boxes continue to outnumber those able to take card payments. This is changing, though, with an increasing number of charities, clubs, houses of worship, and others in the non-profit sector adopting wireless donation points.

An IoT-enabled donation box can be either static or mobile – or both – and opens up new and connected ways of fundraising. In fact, in the Netherlands, when WhyDonate introduced connected donation boxes, the charity saw a 200% increase in the average amount of donations in the first months of testing. And with more and more people using mobile wallets, a donor can simply tap their phone or watch against a smart tag or scan a QR code to make a donation. Charities who engage in street corner donations can collect funds from pedestrians simply by having them tap their card or their phone. The data collected from these devices allows charities to build digital profiles of the typical donor, which can assist them in pinpointing their efforts in the future.

Fitness trackers

A lot of charities raise money through organized events, such as sponsored runs or walks. In the old days, if you needed sponsors, you may have solicited friends, family, co-workers, and others. In the wake of Covid, a number of solutions have emerged that allow people to take part in charity runs or walks without congregating in large groups. Apps track a person’s chosen location and money is raised as they make their way along a ‘virtual racetrack’. Because sponsors can follow the progress being made, everyone stays motivated and invested in the outcome. Some solutions include features that allow organizations to create customized milestones and most work as well on a smart phone as they do on a fitness tracker.

Transparency

Nearly three out of four Millennials donate to charity annually and more than half of Gen Z are actively considering a career in non-profits. For the younger generations, it’s no longer good enough to throw a charity ball and watch the money roll in, though. Instead, younger donors want to know where their money is going, and they want to see the results.

IoT allows charities to track results through connected sensors and other smart devices, and with the data that is generated non-profits are able to capture and communicate the impact their work is having with concrete results. If a charity is providing clean water to children in developing nations, sensors in a water well could, for example, collect data indicating everything from maintenance to water usage, showing donors exactly what their donation is supporting.

Virtual giving

After months and months of virtual work meetings, virtual conferences, and virtual life, it’s no surprise that you can now give virtually – and connected devices are making it as easy as asking Alexa what time the next train leaves. According to a survey from National Public Radio (NPR) in the US, 57% of individuals who own a smart assistant have used it to order something, so it’s not a big leap to go from paying for a product to supporting your favorite charity.

Non-profits can also take advantage of smart assistant technology by encouraging behavior that aligns with their mission. If the mission is to reduce food waste, smart assistants can give tips on how to achieve this. Smart assistants can also connect non-profits with both individual donors and companies. The British Heart Foundation already uses smart speakers to take donations using voice recognition through a devices’ IoT-connected microphones.

Digital screens continue to grow in public spaces, giving charities a new way of sharing their message with potential supporters and hopefully soliciting donations.

Virtual reality

Many non-profit organizations have relied on expensive, long-distance trips to show investors where their donations are going. Virtual reality (VR) allows investors to experience projects in far-flung locations without ever leaving home. This not only allows more potential donors to see the work of the charity, it also allows money that would formerly have been used to pay travel expenses to go directly towards serving people.

VR technologies don’t come cheap (yet) but by carefully matching technology with use case, organizations will likely gain stronger support and therefore offset initial costs with long-term relationships with donors.

There are myriad other ways IoT is enabling charity, including connected cameras at rescue stations and using the real-time footage at fundraising events to show people exactly how their money is used.  Brooklyn-based HabitatMap launched AirBean a few years ago – the low-cost, compact sensor measures hyperlocal concentrations of harmful microscopic particles in the air, as well as humidity and temperature. The data is then used to create a global map of air quality, which in turn enhances efforts to reduce pollution. This is just one more example of how the charity sector is evolving with the help of IoT.

If you would like to learn more about how IoT can enable your organization, please get in touch.

If Covid-19 has taught us anything, it’s that modern society would have had a much tougher time coping during a global pandemic if it weren’t for technology. In the US alone, individual broadband use has increased 3 gigabytes since the start of the pandemic, and without the internet many of us wouldn’t have been able to buy groceries, work, educate our children, get healthcare, or access entertainment. The health and safety of us all relies on the dependability of the network, and the demand for fast, reliable communication has made it clear that the adoption of 5G and IoT technologies will be critical going forward – but what impact will they have on the environment?

As 5G networks are rolled out, the benefits will be enormous across any number of sectors. An article from Atlantic Magazine – Can 5G save the planet? – describes how international standards for 5G call for reduced energy use, when compared to 4G networks. The goal is to ‘use less power to transmit more data, decreasing the wattage required for each bit of internet traffic’ – something that could be a gamechanger when it comes to environmental impact. That said, there are potentially both positive and negative factors when it comes to 5G and carbon emissions, but because the technology is so complex, there are no simple answers.

There are, of course, any number of steps that that can be taken to offset any negative impact 5G might have on the environment, including decarbonization, biodegradable sensors, more efficient cooling, recycling toxic materials, and network sharing. And there are signs that 5G will support efficiencies across many industries that will lead to the reduction of fossil fuel usage and the resulting carbon emissions. When it comes to IoT technology, we already know it enables things like smart lighting, and has a significant impact on water usage, with sensors monitoring the entire water cycle, from sourcing to treatment to delivery to consumption.

Now, if we marry 5G technology with IoT, there are any number of opportunities to protect the environment, including increased energy efficiency, reduction of greenhouse gases, and the enablement of great use of renewable energy. Furthermore, 5G and IoT will give all infrastructure-related systems, from garbage collection and electrical grids to water and heating systems, an unprecedented level of data access and transparency, which in turn will help reduce air and water pollution, minimize water and food waste, and protect wildlife, while also giving us a greater understanding of weather, agriculture, pests, industry, waste reduction. And all of this will mean overall efficiency and better and faster decision-making.

Reduced energy consumption & emissions

Through the use of 5G-enabled IoT sensors, transportation networks, buildings, factories, streetlights, homes, and a whole lot more will be able to monitor and analyze energy needs and consumption in real time, resulting in optimized energy usage. Devices will be able to power up and shut down automatically, cutting energy usage. Already, smart meters installed in New York City’s Empire State Building have been able to cut energy costs by roughly 38%, while General Electric has been recognized by the Guinness Book of Records for having the world’s most efficient combined-cycle power plant, based on an achieved efficiency rate of more than 62%. And saving energy means you are also cutting greenhouse gas emissions; a study by Ericsson projects that IoT could cut carbon emissions by 2030.

And as we either continue to work remotely or move to a hybrid model, energy is saved, and emissions are reduced due to less commuting and business travel. If travel is necessary, time, fuel, and emissions can be cut by reducing traffic congestion through the use of 5G-enabled sensors and cameras, which monitor in real-time and change traffic lights or perform other actions.

Reduced water & food waste

Water is a limited resource – just 3% of the world’s water is fresh, and only two-thirds of that is accessible, so without improved water management strategies, people around the world could be facing shortages of clean, safe water as early as 2025.

Many of the applications and improvements that 5G will bring will be related to any any device that can be connected to a sensor and thus provide data. 5G technology will mean the ability to connect thousands of devices with robust and reliable connections, and IoT-specific technology such as LTE-M will mean reduced battery consumption. If we look at this from a water conservation perspective, thousands of smart water sensors will be able to detect leaks, water pollution, and contamination, as well as rising water levels in sewage systems and natural bodies of water. This is great news, because in the US alone households waste more than 3 trillion liters of water annually due to leaks alone. Additionally, sensors are already being used to monitor temperatures in lakes, rivers, oceans and other bodies of water, which means quicker action can be taken when rising levels are shown. In other words, when water temperatures rise, marine species and ecosystems can be under threat – and early intervention can make all the difference.

In agriculture, where a variety of factors already negatively impact the industry, the mass deployment of sensors can not only optimize water usage, sensors can also be utilized to monitor and better understand the health of soil, weather patterns, crop conditions, pests, nutrients, and a host of other factors in order to not just improve yield and use of resources, but to also cut back on the use of dangerous chemicals. And with the UN estimating that about one-third of food produced globally going to waste, sensors being used to detect both freshness and spoilage is a big step towards bringing that number down. Sensors can also be used to track the entire food chain, as well as monitor conditions in factories to assess quality and regulatory compliance. All of this reduces food waste, saves on resources, maximizes safety, and allows a faster and more agile response along the entire supply chain.

Network efficiency

The migration from 3G and 4G to 5G will lead to greater efficiency of transmissions. One study, from the University of Zurich and Empa, analyzed the impact of 5G on the emissions of greenhouse gases. They concluded that by 2030, the 5G network should cause around 85% fewer emissions per unit of data transported than today’s mobile networks. Additionally, indirect savings from new uses will come from things like smart grids or targeted use of fertilizers and pesticides in agriculture. And the faster, more reliable, and much larger data transmissions combined with the efficiency of the 5G network will support flexible working and virtual collaboration, thus reducing traffic on our roads and business travel.

There are myriad other ways 5G and IoT will support a more sustainable society, and because 5G is so new, the possibilities are not all known. And while there are concerns about negative impacts, Tele2 has committed to being a leader in sustainability and is the first climate neutral telco in the Nordics and Baltics.

If you would like to learn more about how 5G and IoT can enable your business, please get in touch.

Learn more about 5G & IoT

While adoption of IoT technologies in the financial sector isn’t as high as in many other industries, this is understandable, given the conservative nature of the business.  But fintech startups, banks, and other financial institutions who are able to see the possibilities that will be enabled by IoT will become the industry leaders of tomorrow.

Nearly every industry is either already digitalizing or making plans to do so, and today it is no different for the banking industry. As more and more customers expect personalized experiences the need for real-time data and analysis is only increasing. In the banking industry, the use of data helps understand buying habits and financial health while also driving new revenue streams and enabling what many of us are already happily enjoying: an entirely digital banking experience.

In the US alone, 81% of consumers already use mobile banking, a number that is even higher in some other regions, such as the Nordics, where the use of online banking services is from 84-95% of the population.  With these kinds of numbers, it’s clear that it’s not a matter of if banking will embrace digital transformation into their operations, but when and how – and it’s IoT that is helping drive this change.

Enhanced banking experience

No matter if the consumer visits a physical branch or does their banking online, IoT technologies are enabling more convenient and personalized experiences. We’ve long seen ATMs at the mall, in grocery stores, along busy shopping streets, etc., ATMs are actually an early prototype of an IoT device, allowing real time transactions while doing away with the need to stand in line at the bank to access accounts, which results in reduced staffing costs.

In order to further improve customer experience while also reducing costs banks are turning to new IoT technologies. Some banks have started using beacons to send customized offers to customers’ smartphones as soon as they enter the bank, while some ATMs have live stream video that allows customers to speak to someone at the bank if additional support is needed. This more customer-centered approach allows banks to serve the needs of specific demographics. Additionally, the data collected can be used to create customer profiles that can be leveraged to assist in improving the customer’s financial health, as well as building trust and loyalty.

Speaking of data…

Customers are increasingly using smart devices to do their banking, and data collected from mobile banking and apps, for example, allows banks to anticipate customer needs and provide advice and solutions that help customers make sound decisions regarding their finances. This creates customer loyalty and in an ideal world increases business. Additionally, financial institutions are using IoT functionality to forecasts future trends and market conditions through data analytics and predictive modeling, and these valuable insights can be used to create new products and services. Data can also be used by key decision-makers to judge the worthiness of different features on apps and where to invest in development.

Smart collaterals

Imagine a scenario where a retail customer or SME can raise short-term financing by offering collateral, such as machinery, cars, or other assets – but without having to head down to the bank to speak with the lender in person.  Enabled digital identity, along with IoT technology, changes the whole process. The request for financing, along with transfer of asset ownership, can be automation and digital and achieved in a matter of seconds, which allows the bank to issue the loan immediately while monitoring the collateral status in real time without the need to take physical custody of it. How? Through connecting assets.  If the borrower defaults on a payment, that car they used as collateral can be remotely disabled until payment is made. Additionally, the state of the collateral can also be monitored.

Tailored insurance

Insurance companies already offer devices that plug into the on-board diagnostic port of cars and send driving behavior back to the company.  While this might not be advantageous to the more adventurous drivers among us, this data does allow insurance companies to offer discounts based on driver behavior, and also allows for tailor-made insurance based on driving habits, the health of the vehicle’s engine, and general wear and tear on it. Additionally, data can give insurance companies critical insights into the likelihood of accidents in certain areas and price policies accordingly.

A word about security

Banks and other financial institutions are, by their very nature, conservative, which tends to make them later stage adopters of technologies. Like healthcare and other mission-critical solutions, a mis-step can have drastic consequences for both individuals and society. For financial institutions, the early focus was on things like video surveillance in order to reduce fraud and improve both customer service and internal training. But as more and more IoT devices are deployed, it is vital that security measures are put in place. Encryption and vulnerability testing are essential in ensuring the secure transfer of data, while regular updates and firmware on network devices must be installed, and proper password hygiene practiced. You can learn more about security in our IoT & Security White Paper.

If you would like to learn more about how IoT can enable your business, please get in touch.

Learn more about IoT

IoT isn’t an entirely new concept for the hospitality industry. Many players have already incorporated IoT into their businesses and are using it to deliver benefits that run from delivering a more seamless customer experience to optimizing energy costs. According to PwC (PriceWaterhouseCooper), 70% of hospitality executives report already having active IoT projects, and they are using IoT to bring efficiencies to both the front of the house and the back of the house.  Here’s how.  

Hyper-personalization

Connected hotel rooms allow guests to control various room features, such as heating, ventilation, and air conditioning systems, from their mobile phones or from a tablet provided by the hotel.  Guests can also use their devices to control the television, lights, and other electronics in the room, and all that data that is collected can be used by hoteliers to anticipate guests’ needs and provide a personalized experience.  Each time the guest enters their room, an automated personalized greeting can be sent, while at the same time the room automatically switches to the last saved preference, such as playing music, streaming TV services, adjusting the lighting, or opening the curtains. Additionally, by combining smartphone capabilities with beacon technology and other sensors, even more customized information can be sent to guests, such as capacity information for on-site amenities like the spa or pool, wait times for dining, or recommend suitable events close by.  Additionally, the rise of autonomous delivery robots can automate hotel room service, handling room deliveries quickly, safely, and reliably.

quotes icon

For repeat visitors, actionable data allows hoteliers to preselect things like a guest’s preferred room location and bed type, along with presenting a welcome tray featuring their preferred snacks or wine. In other words, you can roll out the red carpet for your VIP customers with ease.

Seamless check-in

Instead of waiting at the front desk to get your room key, IoT eliminates the need for elaborate check-ins. With IoT hotels can automatically send a digital key to a guest’s mobile phone shortly before check-in, and this digital key can not only communicate with the door, it can also eliminate the need for checking in at the front desk, because the first time it is used to unlock the guest’s room, they are automatically checked in.

Predictive maintenance

Preventive maintenance has been the standard for hotels, with regular maintenance checks designed to reduce guest complaints and prolong equipment life. With IoT, predictive maintenance allows you to address equipment failures before they happen. Staff are provided with real time information about the operating status of equipment and appliances, with alerts being sent when there are any warning signs of deterioration or unusual performance. For example, connected thermostats and air conditioners can identify equipment issues before there is a full breakdown. Sensors indicating water usage going up in a particular room while no one is inside could indicate a leaky faucet or toilet, while sensors on pipes throughout the building can also identify leaks or other problems. The main benefit is that repairs can be carried out quickly or replacements fitted before the equipment fully stops working, something that is crucial when we’re talking about equipment or appliances that the hotel cannot operate without. It’s also a money saver, as an early repair will cost both less money and use less manpower.

Energy savings

When it comes to energy savings, IoT has some pretty obvious applications, such as monitoring the occupancy of a space to optimize heating/cooling and lighting within an environment, which leads to decreased energy consumption and therefore reduced energy costs. This is important because utility costs represent a massive portion of operational expenditure and electricity costs are going up. And energy savings means you can reach your sustainability goals.

quotes icon

A connected energy management systems allows you to monitor and manage parameters online, giving you the ability to adjust settings quickly and easily in all or some of your guest rooms – without compromising on guest comfort.

Data can help determine where things like insulation, windows, equipment, etc. need to or can be improved. Integrating different systems, such as elevators, guest room management, workforce, and property, provides logic between different data points, bringing awareness of what is going on across your entire operation, allowing for better planning of energy needs, both in real time and for long term planning.

Asset management

From machines to food trays, IoT technology can help manage assets and inventory in real time, alerting staff to service needs, while also enabling long term planning needs.  Connected asset trackers placed on both indoor and outdoor equipment speed up the process of finding needed machinery and equipment, shortening or eliminating wait times for things like luggage racks. Sensors on room service trays can alert staff when they have been left outside a room for pickup. Smart equipment enables staff to keep tabs on inventory such as towels, dinnerware, or anything else automatically, allowing them to work more productively and efficiently.

Safety & security

Automated smart door locks, where guests are sent a digital key on their smartphone, is one great security feature enabled by IoT. But hotel safety isn’t just about guest room. Equipping a hotel with IoT means the entire site can be protected using customized programs and protocol settings, which, in the event of a security breach, can instantly trigger door locks, emergency lights, and automated alarms sent to authorities. Biometric-based technologies that support facial recognition can be used to streamline check-in, but they can also help detect suspicious behavior and identify people who might cause problems. Non-intrusive connected buttons that are only activated by employees also give staff a way to request assistance.

The future

While IoT is already being implemented in hotels in myriad ways, the future may bring staff-less hotels. While in theory this may make sense due to money saved and revenue boosted, what is more likely is that as IoT in more closely implemented, many services will become automated, with staff being employed for better customer engagement.

If you would like to learn more about how IoT can enable your business, please get in touch.

IoT can’t stop disasters from happening, but it can help identify life-threatening hazards, alert authorities at an early stage, and assist in rescuing those affected, saving lives, resources, and money. Through the use of IoT technologies emergency management and response can be enhanced, and as a result have far better outcomes.

Australian bush fires, Indian monsoons, earthquakes in Japan, Northeasters along the US east coast – most natural disasters are inevitable, but the worrying news is that they are on the rise.  According to a United Nations (UN) report from October 2020, extreme weather events have dominated the disaster landscape in the 21st century, and it can be linked to a rise in climate-related disasters, including extreme weather events.

To put this in perspective, between 2000 and 2019, there were 7 348 major recorded disaster events, which claimed 1.23 million lives and affected an additional 4.2 billion, resulting in nearly $3 trillion in global economic losses. What makes these figures stand out is that they show a sharp increase over the previous twenty years, which saw just over 4 000 disasters which led to roughly $1.6 billion in economic losses and claimed 1.19 million lives.

Floods and storms have seen the most prevalent increase, with floods more than doubling, but there have also been major increases when it comes to drought, wildfires, and extreme temperature events, along with a rise in geo-physical events, such as earthquakes and tsunamis, which have killed more people than any other natural hazard. Add man-made disasters, such as hazardous material spills, infrastructure failures, and explosions, to that pile and it’s obvious that emergency preparedness has to not just improve but become more efficient.

quotes icon

While we can’t do away with disasters, we can improve both our preparedness and our response through IoT-enabled prediction and early warning systems, along with IoT-enabled response systems.

According to the Global Disaster Preparedness Center, there are four phases of emergency management: Mitigation, Preparedness, Response, and Recovery.

Mitigation
Minimizing the effects of disaster, such as implementing building codes and zoning, vulnerability analyses, public education.

Preparedness
Planning response, including preparedness plans, emergency exercises and training, warning systems.

Response
Minimize hazards created by disaster, such as search and rescue, emergency relief

Recovery
Return the community to normal, through things like temporary housing, grants, medical care, and IoT can be a game changer in a number of ways.

Through the use of, among other things, sensors, robots, and unmanned vehicles, IoT helps minimize risks and improve response by transforming disaster management from reactive to proactive. And the data generated by these devices minimizes the risk of being taken off guard while helping everyone to make more informed decisions. Additionally, enhanced communications systems assist in rescue work. Here’s how:

Mitigation
IoT devices and sensors can collect near-real-time data on things like water levels, volcanic activity, and barometric readings. Sensors can detect wildfires, tornadoes, cloudbursts, volcanic activities, earthquakes, etc. and send early warnings. Additionally, critical infrastructure (or any infrastructure, really) can be protected through predictive maintenance. Hazard mitigation is enabled by using sensors to monitor pollutants and contaminants, including radioactive situations.

Preparation
Emergency preparedness can be enhanced through IoT-enabled response mechanisms, procedures and rehearsals. Real-time data from sensors, cameras, and other connected devices can be embedded into infrastructure, making it possible to monitor conditions in real time, as well as receive vital data both historical and in real time. This data allows city managers to prioritize repairs and employ preventive maintenance. And the connected devices deployed in buildings, bridges, roads, and other infrastructure can also be used to provide alerts and enhance communications. Additionally, through the use of IoT devices, strategic reserves of food, water, clothing, medical equipment, and other vital supplies can be monitored to ensure acceptable levels.

Response
In the immediate aftermath of a disaster, situational awareness is critical to ensuring resources are prioritized in order to have the most impact and help those most in need, but as operations go on, recovery efforts must be repeatedly updated based on changing conditions. Widely deployed IoT technology within a city’s infrastructure, in forest areas, or anywhere else, for that matter, can be re-tasked to identify emergency conditions, people who are trapped, or the status of things like the power grid. First responders need actionable information and IoT can facilitate response planning and actions through the use of sensors to monitor the movement of key personnel, as well as sensors and IoT-enabled cameras on the scene of the incident. Situational awareness and incident management can be achieved through things like smart clothing, which can monitor and report things like a firefighter’s vital signs and on-scene conditions, allowing them to be pulled from the scene if things become too dangerous. First responders can also be equipped with audio and video sensors, or supported by autonomous drones and vehicles, allowing dangerous situations to be monitored and assessed from a safe distance.

Automated IoT systems can send out alerts, news, and other digital resources to keep the public informed in real time. Mobile updates can provide vital information, such as where a tornado has touched down, or provide information of how to keep safe, where to find a safe location, and resources for seeking shelter or life-saving supplies. Connected digital signs, such as at bus stops, on roadways, and in city squares, can also be used to spread critical information quickly. Battery powered IoT devices can enable limited communication services, such as emergency micro-messaging.

Recovery
Disaster recovery efforts and operations can be extremely challenging, placing significant demands on multiple resources, including both local and international emergency response personnel, NGOs, and the military, all of whom must collaborate and share resources and information in order to execute recovery quickly and effectively. IoT devices can help in search and rescues operations, as well as monitor post-disaster conditions and levels of vital resource stockpiles. IoT can continue to be used to disseminate information to the public while normal communications are still being repaired.

If you would like to learn more about how IoT can enable emergency management, please get in touch

Without connectivity there is no IoT – it is the foundation upon which everything else is built. But connectivity has evolved since the early days of IoT and today there are a wide range of connectivity alternatives, which can make it challenging to understand which one is right for your solution.  

Back in the early days of connecting things, selecting your cellular connectivity technology was pretty simple: you popped a SIM card into your device and used 2G data or SMS. 2G was quite mature and stable and offered a simple way to transport small amounts of data for the high value use cases that were first addressed.  

Today, the number of devices has skyrocketed globally, and the use cases are much more varied, so it makes sense that connectivity would evolve in order to adapt to different needs, including cellular technology. This evolution drives complexity in IoT, both on the device side and the connectivity side, and makes it more challenging for customers to make the right technology choice. Today, it might be 2G and 4G, but tomorrow it will be one of the 5G technologies.  

quotes icon

When looking at which IoT connectivity technology is right for you and your business, there are a number of factors to consider, including bandwidth capacity, coverage, and power consumption.

You need to ask yourself if you need connectivity right now, or will you need it a year from now and ten years forward. What is your data and latency? How easy will it be to exchange the technology going forward, and what are the basic requirements of your use case?

6 connectivity components

Coverage 

Some IoT solutions need deep indoor coverage, while others regularly move around so that they always will find coverage somewhere. We are used with having cellular networks having 2G and LTE coverage almost anywhere and the technologies LTE-M and NB-IoT allow for even better coverage. If we assume that LTE-M and NB-IoT are activated in the same cells as is currently providing LTE, an extended coverage than what is provided today by the network operators can be expected.

Power consumption

Power consumption may play a critical role in the type of connectivity you choose for your IoT solution. Will your devices have constant availability of a power source or will they run on battery power? Will the batteries be rechargeable, or can they be easily replaced? LTE-M and NB-IoT are conservative on battery power and have battery saving possibilities such as PSM (Power Saving Mode) and eDRX (Extended Discontinuous Reception) that can reduce power consumption by reducing the responsiveness of the device. By securing good coverage where the device is located and limiting the communication, battery power can be saved.

Bandwidth & latency

Does your IoT solution require high data output with low latency, or will you be transmitting small amounts at regular intervals? There is a vast difference between CCTV with its high usage and bandwidth requirements, charging stations that need to be instantly activated, and temperature sensors with regular sensor readings – different factors will affect your choice of technology. LTE and 5G support low latency, high bandwidth, while LTE-M and NB-IoT support low cost and power consumption.

Cost

Total cost of ownership in IoT solutions include multiple cost points, such as subscription and usage fees for connectivity, bill of material for the device, the need to visit the device regularly and, in some cases, even running your own last mile network. The choice of technology affects the cost for your IoT solution. Make sure you are getting the connectivity you need at a total cost that fits your budget.

Most operators today offer a connectivity management platform to manage your cellular connectivity. They should offer smart automation functionality that can help you ensure that your connectivity costs are under control during the lifetime of the device with a limited amount of manual intervention.

Reliability and Security

For almost any IoT solution, reliability and security are crucial. For some, the connectivity is mission critical for providing the service. When selecting connectivity technology, make sure that you select one where there are partners that can provide a reliable and secure network service.

Long-term Support

The business case of most IoT solutions rely on devices that are functional for a long period of time. Depending on the technology and supplier choice, this will affect the long-term support. Cellular operators offer services on licensed frequencies that are backed by GSMA and 3GPP. We see that 2G and 3G networks are being sunsetted, while LTE and 5G will be around for many more years. LTE-M and NB-IoT are forward compatible in 5G and will have long term support in the industry.

As new technologies emerge and others are being sunsetted IoT will continue to evolve.  It is crucial that your connectivity provider is not able to just meet your needs today, but is also preparing to meet them tomorrow.

If you would like to learn more about how Tele2 IoT can meet your connectivity needs, please get in touch..

Learn more about IoT & global cellular connectivity

As LPWA (low-power, wide area) networks come into their own as an IoT technology, it’s important to look at what the different options are and how they can impact your deployment, both now and in the future. There are two main categories of LPWA technologies: those deployed on licensed radio spectrum and those deployed on unlicensed radio spectrum.   

LPWA on the licensed spectrum

MNO’s (Mobile Network Operators) procure licenses to operate within dedicated parts of the radio spectrum. This mean that no one else is allowed to use that part of the spectrum unless the operator allows them to. Since the operator have full control, they can provide high transmission quality, data security, stability, scalability and speed. In addition, they ensure that the quality remains over time, by tweaking the network as the subscriber’s usage patterns evolve. 

There are two key types of LPWA technologies deployed on licensed spectrumLTE-M and NB-IoT Both are acknowledged as the technologies that will be part of the 5G mMTC (Massive Machine Type Communications) standard which will enable massive IoT, with LTE-M in particular emerging as the strongest option for migrating legacy 2G and 3G devices, and also supporting new applications that require higher bandwidth along with lower power consumption and extended battery life. 

LTE-M and NB-IoT are both based on standards set by 3GPP, the organization that defines standard for technologies used within the telecom industry. More than 900 mobile operators around the world support 3GPP standards, covering the majority of the globe where businesses operate. These standards make it easy for devices to seamlessly roam from one network to another, making it possible to create one device that can work on network across the globe. The standard also ensures the longevity of a technology, a very important aspects when deploying an IoT solution that is meant to last for many years. 

LPWA on the unlicensed spectrum

Unlicensed spectrum isn’t owned by anyone and can be used free of charge, without any rules on how to get access at any given time. This allows for a lot of flexibility, but since it doesn’t require a license or fee it can become crowded. Everything from WiFi routers to cordless telephones and other communication devices also use unlicensed spectrum, meaning that IoT solution deployed in the unlicensed spectrum run the very real risk of interference. Technologies such as LoRa and Sigfox are based on unlicensed spectrum.  

While you might see upsides to these technologies, such as deceptively cheap devices, it’s important to consider the whole picture. Basing an IoT solution on these technologies often mean that you need spend money to procure and operate your own radio network, since most countries in the world does not have nationwide LPWA networks on the unlicensed spectrum.  

With the unlicensed part of the radio spectrum open for anyone, it makes it easy for anyone to establish their own private network. However, there is the risk that anyone else can do the same, resulting in interferencebetween networks. This is the same phenomenon that you might have experienced with your home Wi-Fi. When you first set it up it works great and provide high speeds, but 6 months later the neighbor buys a new Wi-Fi router, and all of a sudden you have a hard time getting a reliable connection since you are now (unwillingly) sharing the same part of the unsilenced spectrum.   

Let’s look at it another way

Think of licensed and unlicensed spectrum as the difference between an elegant dinner party at an exclusive restaurant and a party you might have attended back at university. Both start pretty much the same way: people arrive, there is plenty of room to move around, you can hear each other talk, and when the music comes on there’s room to dance. Fast forward a few hours, though, and things have changed: those who are at the dinner party are still able to converse and there’s plenty of elbow room at the table. At the university party, however, loads of people have crashed, everyone is shouting over the music, and if you try to dance there’s a good chance you’ll knock people over the second you break out your moves. Licensed spectrum is the elegant dinner party, where only the people invited are there and things are under control. Unlicensed spectrum is the frat party, where the lines to the bathroom are long and no one can hear what anyone is saying.  

What happens as the parties evolve? If new guests show up to the dinner party at the restaurant it’s not a problem because the restaurant staff are experienced and prepared – they’ll just bring an extra table and some chairs, and things will carry on as before. At the frat party, on the other hand, you don’t even know how many people will show and there’s a good chance endless strangers will crash the party and chaos will ensue.  

So, how does this relate to radio spectrum?  If you use unlicensed spectrum you have no idea who is joining the party – you might be one of the early arrivals but in a year or two there could be all sorts of devices crowding into your space, which would greatly reduce your ability to have efficient and IoT connectivity.  Using licensed spectrum, on the other hand, means you always have a professional taking care of the space your devices are communicating within, so you never have to worry that the service is being degraded.  

If you would like to learn more about how IoT can enable your business, please get in touch.

Learn more about global cellular connectivity

In the late 1800’s people stopped using oil and kerosene lamps in favour of the new big thing – electricity. And without giving it much thought, they stuck to the idea that the control for the light source should be placed adjacent to the lamp. So in order to turn on the light in the hallway you had to walk into the darkness until you reached the actual lamp. Soon someone came up with the idea that you could place a chain just inside the door. The chain was connected to the actual light switch by the use of rope and a pulley system. A somewhat primitive solution, but one that did the job, to put the light switch where it made most sense. The rest is history and today lots of things in our houses are connected and can be controlled by the use of smart phones. A tech-person may describe The Internet of Things (IoT) as connecting something physical with something digital. But for the rest of us, it’s simply evolution. An ongoing passion to improve and make life better. It can be a capsule inside your body keeping an eye on your vital signs. Or perhaps a new clever light switch.

IoT isn’t rocket science, it’s just the next step to make your company thrive

In a world where products have become almost indistinguishable from each other, competing with price has become an unwanted necessity. IoT can be a real business opportunity for companies that up until now have been selling products. With an IoT solution that adds value to your offer, you seamlessly move into selling a service. Say, for instance, that you sell tyres. If you add an IoT solution that informs the driver when it’s time to change tyres or how they should adapt their driving based on both tyres and weather conditions – then you have differentiated your offer and moved into a more value driven relationship that many customers are willing to pay more for. IoT is not about technology, it’s about where you want to take your company and how your are going to get there. Vision and strategy got your company to where it is today. It will take you to the next level as well. And IoT is a new possibility that can make a huge difference.

Think big. Start small.

No matter what line of business you’re in, every company needs to evolve in order to compete and be relevant to customers. IoT can be a new tool to get there. Spend a day with your colleagues and throw some ideas around on how a digital connection to your product can enhance customer experience, improve reliability, safety or any aspect that is relevant to your line of business. Most likely you will come up with a ton of ideas, with a spread from the very simple to the very complex. A good starting point for any IoT journey is to choose the smallest and simplest of those ideas. Every step into new technology involves a lot of learning and you need to learn to walk before you can run. Someone said that all new ideas go through three stages: First it’s ridiculed, then criticised and finally embraced. So in every successful IoT project it’s crucial to find a hero. Somebody in your organisation who is passionate and determined enough to see it through these stages.

And after your first success, you can start thinking bigger.

LTE-M, the low-power, wide area (LPWA) cellular technology, is specifically designed for IoT. It prioritizes a powerful reach over long distances and scalability for large or growing deployments, allowing the connection of simple devices that transmit low volumes of data over long periods of time with low power consumption. 

These features make LTE-M and other LPWA technologies ideal for any number of use cases, opening up the very real possibility of connecting all kinds of assets through a single, secure, and lasting solution. In other words, LTE-M will lead to massive IoT, empowering organizations to work with increased operational efficiency while gaining greater insights into their entire business.

Logistics

LTE-M is ideal for assets on the move because devices need to operate without a fixed power supply or regular recharging. And due to the extensive coverage it provides, LTE-M allows you to track the location and status of assets such a vehicles or containers while still maintaining an excellent battery life. Any number of things can be tracked and recorded, including fuel consumption, stops and starts, toll fees, route taken, driver behavior, etc. You can track the conditions of the goods, looking at things like humidity, temperature or other container conditions that could have an adverse impact on your assets, which allows you to react sooner, rather than when it might be too late.

Industry/Manufacturing

IoT is already being used to improve the safety and efficiency of industrial production, but monitoring things like petrochemical and waste storage or hazardous fluid tanks can be challenging, due to remoteness and dangerous conditions With LTE-M, low-power, low cost sensors enable monitoring of everything from humidity and temperature to impacts and breakages, enabling better use of manpower, keeping safety standards high, and saving money by catching problems early.

LTE-M Benefits

Wider coverage

LTE-M allows you to operate in extremely challenging locations, such as under manhole covers, in underground pipes or in car parks, basements or other remote areas. It is suitable for both static and mobile use cases.

Lower costs

LTE-M-enabled IoT devices are cost effective to produce, and inexpensive to buy. They also cost less to scale up. Longer battery life means no external power supply is needed, while maintenance costs are reduced due to fewer onsite visits.

Enhanced security & reliability

LTE-M networks are secure and reliable, with carrier grade security. Since LTE-M operates on the licenses spectrum, devices are not subject to radio interference or congestion, a risk that unlicensed LPWA technologies face since there is no control of the radio environment.

Future proof

LTE-M is the standard set by 3GPP (Third Generation Partner Project), and is neither vendor nor operator dependent. Instead, it is supported by multiple providers, as well as hardware manufacturers globally. LTE-M is set to become a part of the 5G standard as it evolves, ensuring it will be supported for a very long time.

Smart Cities

In order for a smart city ecosystem to become a reality, there is going to have to be a mass deployment of IoT devices across everything from car parks to street and traffic lights to buildings, public transport, and other public spaces. This mass deployment will be interconnected, making city life easier to navigate in any number of ways, whether that means knowing where you can find a free parking space or when the next bus will arrive, as well as keeping public areas more secure with real-time monitoring of public spaces. Mass deployment brings new cost requirements in order to make projects feasible, thus its support for low-cost devices makes LTE-M a true enabler for these use cases.

Utilities

LTE-M-enabled devices allow you to monitor remote infrastructure and assets, such as underground pipelines and wind, solar, or thermal generation equipment, as well as smart meters. This will improve efficiencies, allow for predictive maintenance (which in turn leads to cost savings), and provide vital information on things like energy consumption, leading to improved sustainability.

In real terms this could mean monitoring ageing water supply systems, which are prone to leakage and other issues but where challenges are difficult to identify before they become a real problem and cost everyone a lot of money. Sensors detect leaks much more quickly, which allows them to be repaired faster.

LTE-M can also enable use cases where actuators in the field need to be triggered with very low delay, thanks to LTE-M’s very low latency characteristics, especially when compared to other LPWA technologies.

Agriculture/Environment

It’s not easy to change a battery on a cow! Because LTE-M provides the required mobility, reliability, and remote coverage, the tracking and monitoring of livestock such as cattle, as well as wild animals is greatly enhanced.  Out in the field, condition monitoring is simplified, giving you the ability to monitor things like soil quality, weather, temperature, humidity, etc. And governmental agencies and scientists can use LTE-M sensors to analyze water levels, predict flooding, and issue early warnings.

If you would like to learn more about how IoT and LTE-M can enable your business, please get in touch.

Learn more about IoT & global cellular connectivity

Get in touch